The reverence and fear of cast iron cooking pots and pans is stupid on both sides. People have been using cast iron under every condition from the big fire place in a castle’s kitchen to a fire pit in a peasant’s hovel to open fires outdoors to Michelin Star restaurants in Paris and London. And they cooked EVERYTHING in it because it’s what they had and all they had. There is no mystery to seasoning and care of cast iron. Just like there is little to fear from cooking with it.
Those that do worship in the church of cast iron-- just cook in it. There is nothing sacrosanct about it. If your Great Grandmother didn’t worry about it, why should you? Any damage you can do it can be repaired quickly and easily. So get over yourselves.
And those that fear cast iron cookery, get over it…They are often the same ones that are fearful of micro plastics getting ingested and yet have no care or concern while cooking with plastic cutting boards and utensils in plastic coated cookware.
Unless there is a literal hole rusted through it, grab some sand paper and sand the rust off of it. It’s just iron. I’ve done it many times to rescue an old skillet or Dutch Oven.
Short of taking a sledgehammer to it, it’s nigh on impossible to destroy cast iron cooking pans.
I have no fear of cooking with it, I just want my cookware to be minimally fussy and not require special treatment. If the $10 Walmart skillet can be thrown in the dishwasher and the $100 cast iron one requires me to baby it or it’ll rust, I’ll go with the cheap skillet every day.
Teflon also should not go in the dishwasher. Anything with exposed aluminum should not go in the dishwasher. Even stainless steel cookware recommends against dishwasher
Look at Ol’ Diamond Jim over there with his $100 skillets!
I got 2 cast iron frying pans, a 6qt dutch oven, a 2 burner flat iron, and one cast iron 2qt kettle. I ain’t got $50 into the whole lot of them. Vintage cast iron is cheap because it will last for multiple generations and there is lots of it floating around to be had on the cheap.
And if you ain’t got 5 minutes to clean a cast iron frying pan, then no $10 nuclear glow int the dark Walmart special is going to do any better in your care. I highly recommend you find someone to cook for you. Before you give yourself food poisoning.
You have those prices reversed though. My cast iron collection, as noted further down, cost less in total than my one really good stainless steel pan, and guess where some of that cast iron was purchased? For $10 at Walmart, LOL. And at thrift stores and Target.
First, everyone (not you because you don’t like it) should buy their cast iron at the hardware store, should be ~ $30. It’ll last pretty much forever so that $30 over a lifetime is not much.
If you don’t cook a starch or aromatic in it, just wipe it out and let it get super hot.
If you do cook starch in it, hand wash it with soap, just let it get over 212 degrees on the stove to dry it.
If you want to throw it in the dishwasher, just pull it out at the end of the cycle and throw it on the stove > 212 degrees to dry. A well seasoned pan is generally so easy to clean, this would be a waste of your time, but it won’t kill anyone.
If you want to subscribe to the no soap, scrub off the cooked starches with water and a non scratch scouring pad, re-coat in a fine layer of oil and let it smoke off under high heat. I really don’t bother and just use whatever it takes to get it clean easily.
If the seasoning polymer you get from burning off oil gets cruddy after 6-8 months, re-season.
If you accidentally get a little rust on it, soak it in vinegar until the rust dissapears, scrub the spot with a 3m pad until the spot is clean and re-season.
You can get a rusty ass pan from a yard sale, soak it in vinegar for a day, scrub it down and re-season it. It’ll come out like new.
If over the years, the seasoned surface starts to look super cruddy, soak it in sodium hydroxide until the polymer disolves, then reseason.
Yeah, they’re harder than throwing it in the dishwasher, But they’re wasteless, cheap, pleasant to cook on and give great results.
I keep a teflon pan and a couple different cast iron around. Even found a glass top lid that fits.
Lol this response proves OP’s point. “Bro it’s so easy bro just soak in sodium hydroxide and fill your house with smoking oil it’s easy dude just measure how much starch is in ur meal dude lol ez”
These are instructions for those who are picky about stuff.
Just cook in it. After cooking, wipe it out. If its bad, when pre-heating I pull it off to put some water and rub with a pad with minimal soap, rinse that off, and back on the hob. Wow 15s of work before cooking. The horror.
The instructions rumba gave were “if you absolutely fuck up, here are easy ways to fix that so you don’t have to buy a new one”
Yup I usually just dry scrub with a little chainmail scrubber to get all the bits off with. Then I wipe down with a little veg oil and it’s ready for next time.
Tbf the cast iron i’m cooking out of was found as scrap in the woods. I wash with soap regularly, and use normal oil/butter qty’s. I just don’t dishwasher it, not that i have a dish!asher XD. I’ve seasoned it one single time which is right after i found it. It’s been a year.
So much gatekeeping in anything creative. Music, cooking, art…. If you change one little thing it’s no longer the Thing, it’s something else, and it’s not what chef/band/artist/or grandma made, even though it’s a popular variant of the same Thing called the same thing somewhere else. Cast iron falls into the same trap. Such harsh judgement on use and care. It’s a f’n pan, not the last remaining example of a vintage Ferrari. Get over it.
The reverence and fear of cast iron cooking pots and pans is stupid on both sides. People have been using cast iron under every condition from the big fire place in a castle’s kitchen to a fire pit in a peasant’s hovel to open fires outdoors to Michelin Star restaurants in Paris and London. And they cooked EVERYTHING in it because it’s what they had and all they had. There is no mystery to seasoning and care of cast iron. Just like there is little to fear from cooking with it.
Those that do worship in the church of cast iron-- just cook in it. There is nothing sacrosanct about it. If your Great Grandmother didn’t worry about it, why should you? Any damage you can do it can be repaired quickly and easily. So get over yourselves.
And those that fear cast iron cookery, get over it…They are often the same ones that are fearful of micro plastics getting ingested and yet have no care or concern while cooking with plastic cutting boards and utensils in plastic coated cookware.
The mystery is that iron will rust if wet. The care instructions are “don’t leave it wet for a long time”.
Even if it does rust accidentally, can’t you just scrape or buff out the rust and then reseal/reseason it again and it’s fine?
Unless there is a literal hole rusted through it, grab some sand paper and sand the rust off of it. It’s just iron. I’ve done it many times to rescue an old skillet or Dutch Oven.
Short of taking a sledgehammer to it, it’s nigh on impossible to destroy cast iron cooking pans.
Yeah, but it’s a lot faster to dry it after use/cleaning.
Okay but this one time I did exactly that thing I’m not supposed to and exactly what was expected happened so obviously cast iron bad?
Once my colleague’s dad threw gasoline on a fire and got 3rd degree burns, so oxygen is bad.
I have no fear of cooking with it, I just want my cookware to be minimally fussy and not require special treatment. If the $10 Walmart skillet can be thrown in the dishwasher and the $100 cast iron one requires me to baby it or it’ll rust, I’ll go with the cheap skillet every day.
Teflon also should not go in the dishwasher. Anything with exposed aluminum should not go in the dishwasher. Even stainless steel cookware recommends against dishwasher
I put pretty much all of my stainless steel stuff in the dishwasher and it’s fine
Only because some Stainless cookware uses Aluminium rivets for attaching the handle.
Look at Ol’ Diamond Jim over there with his $100 skillets!
I got 2 cast iron frying pans, a 6qt dutch oven, a 2 burner flat iron, and one cast iron 2qt kettle. I ain’t got $50 into the whole lot of them. Vintage cast iron is cheap because it will last for multiple generations and there is lots of it floating around to be had on the cheap.
And if you ain’t got 5 minutes to clean a cast iron frying pan, then no $10 nuclear glow int the dark Walmart special is going to do any better in your care. I highly recommend you find someone to cook for you. Before you give yourself food poisoning.
God I wish, food prep is one of my least favorite things to do lol.
You have those prices reversed though. My cast iron collection, as noted further down, cost less in total than my one really good stainless steel pan, and guess where some of that cast iron was purchased? For $10 at Walmart, LOL. And at thrift stores and Target.
First, everyone (not you because you don’t like it) should buy their cast iron at the hardware store, should be ~ $30. It’ll last pretty much forever so that $30 over a lifetime is not much.
If you don’t cook a starch or aromatic in it, just wipe it out and let it get super hot.
If you do cook starch in it, hand wash it with soap, just let it get over 212 degrees on the stove to dry it.
If you want to throw it in the dishwasher, just pull it out at the end of the cycle and throw it on the stove > 212 degrees to dry. A well seasoned pan is generally so easy to clean, this would be a waste of your time, but it won’t kill anyone.
If you want to subscribe to the no soap, scrub off the cooked starches with water and a non scratch scouring pad, re-coat in a fine layer of oil and let it smoke off under high heat. I really don’t bother and just use whatever it takes to get it clean easily.
If the seasoning polymer you get from burning off oil gets cruddy after 6-8 months, re-season.
If you accidentally get a little rust on it, soak it in vinegar until the rust dissapears, scrub the spot with a 3m pad until the spot is clean and re-season.
You can get a rusty ass pan from a yard sale, soak it in vinegar for a day, scrub it down and re-season it. It’ll come out like new.
If over the years, the seasoned surface starts to look super cruddy, soak it in sodium hydroxide until the polymer disolves, then reseason.
Yeah, they’re harder than throwing it in the dishwasher, But they’re wasteless, cheap, pleasant to cook on and give great results.
I keep a teflon pan and a couple different cast iron around. Even found a glass top lid that fits.
Lol this response proves OP’s point. “Bro it’s so easy bro just soak in sodium hydroxide and fill your house with smoking oil it’s easy dude just measure how much starch is in ur meal dude lol ez”
These are instructions for those who are picky about stuff.
Just cook in it. After cooking, wipe it out. If its bad, when pre-heating I pull it off to put some water and rub with a pad with minimal soap, rinse that off, and back on the hob. Wow 15s of work before cooking. The horror.
The instructions rumba gave were “if you absolutely fuck up, here are easy ways to fix that so you don’t have to buy a new one”
Yup I usually just dry scrub with a little chainmail scrubber to get all the bits off with. Then I wipe down with a little veg oil and it’s ready for next time.
LOL at cherrypicking something I said to do instead of throwing the pan away
I do nothing to my cast iron, it’s rusty and shit, it’s fine.
Tbf the cast iron i’m cooking out of was found as scrap in the woods. I wash with soap regularly, and use normal oil/butter qty’s. I just don’t dishwasher it, not that i have a dish!asher XD. I’ve seasoned it one single time which is right after i found it. It’s been a year.
You might want to check that for lead. People who cast their own bullets have been known to melt lead in cast iron.
Ehhh… I’ve taken the 100LL avgas shower. At this point, a year of cooking later, the damage is done ig. Ill grab a test kit tho.
So much gatekeeping in anything creative. Music, cooking, art…. If you change one little thing it’s no longer the Thing, it’s something else, and it’s not what chef/band/artist/or grandma made, even though it’s a popular variant of the same Thing called the same thing somewhere else. Cast iron falls into the same trap. Such harsh judgement on use and care. It’s a f’n pan, not the last remaining example of a vintage Ferrari. Get over it.